Differences between revisions 14 and 62 (spanning 48 versions)

How to configure a new server for CONTROL.

Installing the OS

Please follow the Installing_Fedora5 instructions for Fedora installations (Latest usable is Fedora 8).

If you installed Fedora 8 using the quick install DVD, Don't forget to clean out the /home/ccc directory of all the additional files that may have come from an old install of another company. Also clean out the /u/cc directory:

#rm -rf ~ccc/*.tgz /u/cc

Additional Operating System configuration

SELinux

SELinux has been known to cause problems with Control's directory model. To turn it off, change /etc/selinux/config to read

SELINUX=disabled

N.B. The changes will not take effect until the machine reboots.

Samba and PAM

New ccpass scripts for updating user passwords work around the problems of password synchronisation. As such, the SambaPasswordSync hack is considered depreciated.

To try and ensure locking works reliably between Windows and Linux, edit /etc/samba/smb.conf and add the following lines after the "global" section header:

#get record locking working between Windows and Linux
        strict locking = yes
        oplocks = False

Serial Ports

In /etc/rc.d/rc.local,

chmod 666 /dev/ttyS0
chmod 666 /dev/ttyS1

yum

In /etc/yum.repos.d/fedora-repo, /etc/yum.repos.d/fedora-extras.repo and /etc/yum.repos.d/fedora-updates.repo, set the enable flag to 1

enable=1

Do NOT do this for any of the development files. Doing so can cause libraries to be updated and, as a result, CONTROL may not run.

Update the packages with

yum update

Note: be careful of glibc updates for older releases of CONTROL

If yum insists on gpg keys then, in /etc/yum.conf and /etc/yum.repos.d/*,

gpgcheck=0

VPN

Copy vpn.tgz from /u and extract it using the following commands:

# scp <user>@sam:/u/vpn.tgz /etc/ppp/
# cd /etc/ppp
# tar -xvzf vpn.tgz

Then as root accept the fingerprint:

# ssh 220.233.135.250
The authenticity of host '220.233.135.250 (220.233.135.250)' can't be established.
RSA key fingerprint is f6:f0:5c:21:74:0e:03:db:fc:71:e6:21:63:b5:c0:43.
Are you sure you want to continue connecting (yes/no)?

Type yes and cancel the connection.

Add the hostname (uname -n) into /etc/hosts on muppets. Assign the machine the next IP in the sequence.

Also update the DNS.

To test the VPN connection, use the following:

# pppd call crecom nodetach debug

Once the VPN can connect correctly, add to the following to /etc/inittab:

vpn:2345:respawn:/etc/ppp/connect-crecom >> /var/log/connect-crecom.error

Additional Packages Needed by Control

The following packages need to be installed to enable some features:

mkisofs - building backup CD images
sharutils - E-Mailing PDF's
dvd+rw-tools - Burning DVD's
postgresql-odbc - New Rel9 and 10 installations require DB support.
cdrecord - Burning CD/DVD backups
rxvt - For running scripts in X11 mode

Configuring the OS for CONTROL

Creating the control group

Create the following group

# groupadd -g 3232 control

Create and configure the ccc user

Create user ccc

# adduser -g control ccc
# passwd ccc

Edit the ~ccc/.bash_profile to the following:

CUST=`uname -n`
export CUST
export PS1='${PWD}!>'
. /u/cc/usr/common.sh
ccusers

Edit the ~ccc/.bashrc and add the following to the end:

umask 0

Setup the VNC password

# mkdir ~ccc/.vnc
# vncpasswd ~ccc/.vnc/passwd

Create the ~ccc/.vnc/xstartup file used by Xvnc. It should read:

export NODEID="vnc$DISPLAY"
sleep 5
. /u/cc/usr/common.sh
exec fvwm

Make ~ccc/.vnc/xstartup executable.

chmod +x ~ccc/.vnc/xstartup

Transfer ownership of folders to ccc

# chown -R ccc:control ~ccc/.vnc

Setup user defaults

Edit /etc/default/useradd such that the following variables are set and that rest can remain the same.

GROUP=3232
HOME=/u/cc/usr

Replace the contents of /etc/skel/.bash_profile with the following

logname=`logname`
. /u/cc/usr/common.sh
if [ "$logname" != "" ]; then
  if [ "$DISPLAY" = "" ]; then
    exec start
  fi
fi

Copy the ~ccc/.vnc/ folder to /etc/skel/

# cp -r ~ccc/.vnc /etc/skel/
# chown root:root /etc/skel/.vnc

Copy CONTROL

Package control programs on sam (Server side)

export CONTROL_FILES="
std/binl
std/utbinl
std/binx11
std/utbinx11
adm
blank
standard
standard.adm
pixmap
lib
binl
binx11
DEMO
manual
usr/common.linux
"
cd /u/ccdev/
tar cvzhf control.tgz --exclude=.sccs $CONTROL_FILES

send control.tgz to client machine

Setup /u/cc/ directory (Client Side)

touch /dev/lp8
chmod 666 /dev/lp8
umask 0
mkdir /u/cc/
chmod 777 /u/cc/
ln -s /u/cc /cc
mkdir /u/cc/usr
chmod 777 /u/cc/usr
ln -s ~ccc /u/cc/usr/ccc
mkdir /u/cc/LOG
chmod 777 /u/cc/LOG
chown ccc:control /u/cc/LOG /u/cc/usr
chown ccc:control /u/cc/usr/ccc /u/cc/usr/ccc/.*
cd /u/cc
tar xvzf PATH_TO_CONTROL_TAR_FILE/control.tgz (do this step if you have already copied control.tgz to client machine)
chown ccc:control std/* std/*/*
chown ccc:control binl/*
chown ccc:control binx11/*
binl/link_cntrl
chown ccc:control standard/*
chmod 666 standard/*
cp /u/cc/standard.adm/* /u/cc/adm
mv /u/cc/usr/common.linux /u/cc/usr/common.sh

Libraries

For Fedora versions prior to Fedora Core 5, update /etc/ld.so.conf to included the following line

/u/cc/lib

For Fedora Core 5 and later, execute:

cd /usr/lib
ln -s /u/cc/lib/libcqt3.* .

You will also need to edit /u/cc/usr/common.sh

LD_LIBRARY_PATH=/lib:/usr/lib:$CCDIR/lib

Then for all versions to rebuild the library cache execute:

ldconfig

X related configuration

Install necessary fonts

As a minimum, the system should have the 75-dpi, 100-dpi and truetype fonts appropriate for the installed X Font Server

To search for the fonts:

yum search fonts

The packages are usually of the form fonts-xorg-75dpi

Once you have found the correct fonts packages

yum install <font package>

Make console (DISPLAY=0) a VNC server

Edit /etc/X11/xorg.conf

Section "Module"
        Load "vnc"      # Add this line
EndSection
Section "Screen"
        Option "PasswordFile" "/u/cc/usr/ccc/.vnc/passwd"       # Add this line
EndSection

Installing FVWM

We use FVWM as a slimline window manager where users don't need or expect a full remote desktop. You'll need to locate files fvwm-2.4.19-1.i386.rpm and libstroke-0.5.1-4.fc4.i386.rpm which are available on sam.

# yum install compat-readline43 gtk+ imlib
# rpm -Uvh fvwm-2.4.19-1.i386.rpm fvwm-themes-0.6.2-1.noarch.rpm libstroke-0.5.1-4.fc4.i386.rpm

Need to update Xclients such that FVWM is started when local user logs in.

# cd /etc/X11/xinit
# mv Xclients Xclients.bak
# vi Xclients

Update Xclients to initialise the control environment and execute FVWM as below:

rm -f $HOME/Xrootenv.0
rm -f /tmp/fvwmrc* 2>/dev/null
. /u/cc/usr/common.sh
exec /usr/bin/fvwm

Finally give Xclients execute permissions

chmod +x Xclients

Configuring FVWM

mkdir /etc/X11/fvwm2

Copy from system.fvwm2rc from /u (sam) or from a recent client's system and place it in the newly created directory. Also place a symbolic link to system.fvwm2rc in /etc/

ln -s /etc/X11/fvwm2/system.fvwm2rc /etc/

User Manuals

Install Firefox

yum install firefox

Download the Adobe Acrobat Reader plugin at http://www.adobe.com and install

firefox http://www.adobe.com

User manual files already included in the tarball copied from sam (/u/ccdev/manual)

Post Control Installation Options

Backups

cocont option Days before display system warning mesg should be set to 30. This allows the client to have at least one system backup to restore various configuration system configuration files in the event of a failure.
Enter the Linux device into cocont's Backup device field.

Scheduled processes

Enter the company code in the script /cc/binl/clrdayqty . crontabsetup auto_postal, eom_job, initda/backups and other scripts that need to run automatically.

For ccc:

* * * * * /u/cc/binl/auto_postal 2>&1 > /u/cc/LOG/auto_postal.out
1 0 1 * * /u/cc/binl/auto_eom >/u/cc/LOG/auto_eom 2>&1
59 23 * * * /u/cc/binl/auto_signoff > /u/cc/LOG/auto_signoff 2>&1
10 0 * * * /u/cc/binl/post_sum > /u/cc/LOG/post_sum 2>&1
0 22 * * * /cc/binl/clrdayqty > /cc/LOG/clrdayqty.out 2>&1

For root:

30 2 * * * /u/cc/binl/netchecktime > /u/cc/LOG/netchecktime.out 2>&1
# The daily backup script
0 3 * * * /u/cc/binl/bacint -s > /u/cc/LOG/bacint.out 2>&1
# Initialise dayfile. Only needed if not using our backup script
#0 3 * * * /u/cc/binl/initda -s > /u/cc/LOG/initda.out 2>&1

Background tasks

You will need to edit /etc/inittab:

id:5:initdefault:  # Need to change run level from 3 to 5
v5:345:respawn:su - ccc -c /usr/local/bin/inittab_vnc 2>&1 >> /var/log/vnc.ccc

Customer Company

coaad Setup the company record(s) for the customer.
Ensure that the /u/cc/<CUSTOMER> directory exists and is a copy of standard. Also make sure that the correct amount of users and locations have been set.
Enter the customer's company name into cocont's Company codes to be backed up field.

Printers, Overlays and Docket Logos

You will need to get the customer's logo and artwork from the sales team.

To create a docket logo, see Docket_Logo.

For a list of compatible laser printers, seeLaser_Printers.

For setting up printers, see InstallingPrinter.

Data Imports

Run any data imports necessary.

Setting up a DEMO company in a server

Follow DemoCD under Linux steps 1-14 for the DEMO company and additional companies as needed.

CategoryInstallation

-  ⇤ ← Revision 14 as of 2006-05-26 07:42:07 → 
  Size: 4398
  Editor: thog
  Comment:
+   ← Revision 62 as of 2013-09-18 06:09:33 → ⇥
  Size: 10370
  Editor: localhost
  Comment: converted to 1.6 markup
-Deletions are marked like this.
+Additions are marked like this.
 Line 1:
-Estimated time for a standard server setup  (Michael's Estimate)

 * Install and Configure OS                          : 3 1/2 Hr
 * Install and Configure CONTROL            : 2       Hr
 * Packing/Unpacking Servers :    1/2 Hr
Total : 6       Hr

== Installing and configuring the OS ==
Please review the [http://robin.crecom.com.au/knowledge/Installation/Installing%20Linux%20Redhat%209%20machine%20for%20Control.htm Installing Linux on Redhat 9] for choosing with components are required during install time. It may be used as a guide for Fedora installations.

== Installing and configuring CONTROL ==
Edit /etc/defaults/useradd such that the following variables are set and that rest can remain the same.

{{{
GROUP=3232
HOME=/u/cc/usr
}}}
+= How to configure a new server for CONTROL. =
== Installing the OS ==
Please follow the [[Installing_Fedora5]] instructions for Fedora installations (Latest usable is Fedora 8).

If you installed Fedora 8 using the ''quick install DVD'', Don't forget to clean out the /home/ccc directory of all the additional files that may have come from an old install of another company.  Also clean out the /u/cc directory:

{{{
#rm -rf ~ccc/*.tgz /u/cc
 }}}
== Additional Operating System configuration ==
=== SELinux ===
SELinux has been known to cause problems with Control's directory model. To turn it off, change {{{ /etc/selinux/config }}} to read

{{{
SELINUX=disabled}}}
N.B. The changes will not take effect until the machine reboots.

=== Samba and PAM ===
New ccpass scripts for updating user passwords work around the problems of password synchronisation. As such, the SambaPasswordSync hack is considered depreciated.

To try and ensure locking works reliably between Windows and Linux, edit {{{/etc/samba/smb.conf}}} and add the following lines after the "global" section header:

{{{
#get record locking working between Windows and Linux
        strict locking = yes
        oplocks = False}}}
=== Serial Ports ===
In {{{/etc/rc.d/rc.local}}},

{{{
chmod 666 /dev/ttyS0
chmod 666 /dev/ttyS1}}}
== yum ==
In {{{/etc/yum.repos.d/fedora-repo}}}, {{{/etc/yum.repos.d/fedora-extras.repo}}} and {{{/etc/yum.repos.d/fedora-updates.repo}}}, set the {{{enable}}} flag to {{{1}}}

{{{
enable=1}}}
Do '''NOT''' do this for any of the development files. Doing so can cause libraries to be updated and, as a result, CONTROL may not run.

Update the packages with

{{{
yum update}}}
Note: be careful of glibc updates for older releases of CONTROL

If yum insists on gpg keys then, in {{{/etc/yum.conf}}} and {{{/etc/yum.repos.d/*}}},

{{{
gpgcheck=0}}}
=== VPN ===
Copy {{{vpn.tgz}}} from /u and extract it using the following commands:

{{{
# scp <user>@sam:/u/vpn.tgz /etc/ppp/
# cd /etc/ppp
# tar -xvzf vpn.tgz}}}
Then as root accept the fingerprint:

{{{
# ssh 220.233.135.250
The authenticity of host '220.233.135.250 (220.233.135.250)' can't be established.
RSA key fingerprint is f6:f0:5c:21:74:0e:03:db:fc:71:e6:21:63:b5:c0:43.
Are you sure you want to continue connecting (yes/no)?}}}
Type yes and cancel the connection.

Add the hostname ({{{uname -n}}}) into {{{ /etc/hosts }}} on muppets. Assign the machine the next IP in the sequence.

Also update the [[DNS]].

To test the VPN connection, use the following:

{{{
# pppd call crecom nodetach debug}}}
Once the VPN can connect correctly, add to the following to {{{/etc/inittab}}}:

{{{
vpn:2345:respawn:/etc/ppp/connect-crecom >> /var/log/connect-crecom.error}}}
=== Additional Packages Needed by Control ===
The following packages need to be installed to enable some features:

 * mkisofs - building backup CD images
 * sharutils - E-Mailing PDF's
 * dvd+rw-tools - Burning DVD's
 * postgresql-odbc - New Rel9 and 10 installations require DB support.
 * cdrecord - Burning CD/DVD backups
 * rxvt - For running scripts in X11 mode
== Configuring the OS for CONTROL ==
=== Creating the control group ===
-Line 21:
+Line 92:
-# groupadd -g 3232 control
}}}
Insure /etc/skel/.vnc/ exists containing {{{passwd}}} (generated from {{{vncpasswd}}}) and {{{xstartup}}} which is an executable script:
+# groupadd -g 3232 control}}}
=== Create and configure the ccc user ===
Create user ccc

{{{
# adduser -g control ccc
# passwd ccc}}}
Edit the {{{~ccc/.bash_profile}}} to the following:

{{{
CUST=`uname -n`
export CUST
export PS1='${PWD}!>'
. /u/cc/usr/common.sh
ccusers}}}
Edit the {{{~ccc/.bashrc}}} and add the following to the end:

{{{
umask 0}}}
Setup the VNC password

{{{
# mkdir ~ccc/.vnc
# vncpasswd ~ccc/.vnc/passwd}}}
Create the {{{~ccc/.vnc/xstartup}}} file used by Xvnc. It should read:
-Line 29:
+Line 122:
-exec fvwm
}}}
Create user ccc

{{{
# adduser ccc
# passwd ccc
}}}
Replace the contents of /etc/skel/.bash_profile with the following
+. /u/cc/usr/common.sh
exec fvwm}}}
Make {{{~ccc/.vnc/xstartup}}} executable.

{{{
chmod +x ~ccc/.vnc/xstartup}}}
Transfer ownership of folders to ccc

{{{
# chown -R ccc:control ~ccc/.vnc}}}
=== Setup user defaults ===
Edit {{{/etc/default/useradd}}} such that the following variables are set and that rest can remain the same.

{{{
GROUP=3232
HOME=/u/cc/usr}}}
Replace the contents of {{{/etc/skel/.bash_profile}}} with the following
-Line 46:
+Line 147:
-fi
}}}
Package control programs on sam
+fi}}}
Copy the {{{~ccc/.vnc/}}} folder to {{{/etc/skel/}}}

{{{
# cp -r ~ccc/.vnc /etc/skel/
# chown root:root /etc/skel/.vnc}}}
=== Copy CONTROL ===
Package control programs on sam (Server side)
-Line 52:
+Line 158:
-/u/cc/std/binl
/u/cc/std/utbinl
/u/cc/std/binx11
/u/cc/std/utbinx11
/u/cc/adm
/u/cc/blank
/u/cc/standard
/u/cc/pixmap
/u/cc/lib
/u/cc/binl
/u/cc/binx11
+std/binl
std/utbinl
std/binx11
std/utbinx11
adm
blank
standard
standard.adm
pixmap
lib
binl
binx11
DEMO
manual
usr/common.linux
-Line 64:
+Line 174:
-tar cvzf control.tgz $CONTROL_FILES
}}}
Long list of commands
+cd /u/ccdev/
tar cvzhf control.tgz --exclude=.sccs $CONTROL_FILES}}}
send control.tgz to client machine

Setup /u/cc/ directory (Client Side)
-Line 77:
+Line 189:
+ln -s ~ccc /u/cc/usr/ccc
-Line 81:
+Line 194:
-cd /
tar xvzf PATH_TO_CONTROL_TAR_FILE/control.tgz
cd /u/cc/
+cd /u/cc
tar xvzf PATH_TO_CONTROL_TAR_FILE/control.tgz (do this step if you have already copied control.tgz to client machine)
-Line 90:
+Line 202:
-scp -r user@sam.crecom.com.au:/u/ccdev/standard.adm /u/cc/adm
copy DEMO9 company/data
copy new QT libraries to /cc/lib
copy common.sh
+cp /u/cc/standard.adm/* /u/cc/adm
mv /u/cc/usr/common.linux /u/cc/usr/common.sh}}}
=== Libraries ===
For Fedora versions prior to Fedora Core 5, update /etc/ld.so.conf to included the following line

{{{
/u/cc/lib}}}
For Fedora Core 5 and later, execute:

{{{
cd /usr/lib
ln -s /u/cc/lib/libcqt3.* .}}}
You will also need to edit /u/cc/usr/common.sh

{{{
LD_LIBRARY_PATH=/lib:/usr/lib:$CCDIR/lib
-Line 95:
+Line 219:
-== Operating System configuration ==
=== Libraries ===
Update /etc/ld.so.conf to included the following line

{{{
/cc/lib
}}}
Then execute:

{{{
# ldconfig
}}}
=== VPN ===
Copy vpn_exetel.tar.gz from /home/usr/michael/vpn/, extract it using the following commands:

{{{
# tar -xvzf vpn_exetel.tar.gz /
}}}
Then as root accept the fingerprint:

{{{
# ssh 220.233.135.250
The authenticity of host '220.233.135.250 (220.233.135.250)' can't be established.
RSA key fingerprint is f6:f0:5c:21:74:0e:03:db:fc:71:e6:21:63:b5:c0:43.
Are you sure you want to continue connecting (yes/no)?
}}}
Type yes and cancel the connection.
+Then for all versions to rebuild the library cache execute:

{{{
ldconfig}}}
-Line 124:
+Line 224:
+=== Install necessary fonts ===
As a minimum, the system should have the 75-dpi, 100-dpi and truetype fonts appropriate for the installed X Font Server

To search for the fonts:

{{{
yum search fonts}}}
The packages are usually of the form ''fonts-xorg-75dpi''

Once you have found the correct fonts packages

{{{
yum install <font package>}}}
-Line 130:
+Line 243:
-End Section
+EndSection
-Line 133:
+Line 246:
-End Section
}}}
+EndSection}}}
-Line 136:
+Line 248:
-You'll need to locate files fvwm-2.4.19-1.i386.rpm and libstroke-0.5.1-4.fc4.i386.rpm which are available on sam.
+We use FVWM as a slimline window manager where users don't need or expect a full remote desktop. You'll need to locate files fvwm-2.4.19-1.i386.rpm and libstroke-0.5.1-4.fc4.i386.rpm which are available on sam.
-Line 140:
+Line 252:
-# rpm -Uvh fvwm-2.4.19-1.i386.rpm libstroke-0.5.1-4.fc4.i386.rpm
}}}
+# rpm -Uvh fvwm-2.4.19-1.i386.rpm fvwm-themes-0.6.2-1.noarch.rpm libstroke-0.5.1-4.fc4.i386.rpm}}}
-Line 147:
+Line 258:
-# vi Xclients
}}}
Update Xclients to only execute FVWM, the orginal (Xclients.bak) file can be modified to do the below.
+# vi Xclients}}}
Update Xclients to initialise the control environment and execute FVWM as below:
-Line 156:
+Line 266:
-exec /usr/bin/fvwm
+exec /usr/bin/fvwm}}}
Finally give Xclients execute permissions

{{{
chmod +x Xclients}}}
Configuring FVWM

{{{
mkdir /etc/X11/fvwm2}}}
Copy from {{{system.fvwm2rc}}} from /u (sam) or from a recent client's system and place it in the newly created directory. Also place a symbolic link to {{{system.fvwm2rc}}} in /etc/

{{{
ln -s /etc/X11/fvwm2/system.fvwm2rc /etc/}}}
== User Manuals ==
Install Firefox

{{{
yum install firefox}}}
Download the Adobe Acrobat Reader plugin at http://www.adobe.com and install

{{{
firefox http://www.adobe.com}}}
User manual files already included in the tarball copied from sam (/u/ccdev/manual)

== Post Control Installation Options ==
=== Backups ===
 * '''cocont''' option {{{Days before display system warning mesg}}} should be set to 30. This allows the client to have at least one system backup to restore various configuration system configuration files in the event of a failure.''' '''
 * Enter the Linux device into cocont's {{{Backup device}}} field.
=== Scheduled processes ===
Enter the company code in the script /cc/binl/clrdayqty . '''crontab'''setup auto_postal, eom_job, initda/backups and other scripts that need to run automatically.

For ccc:

{{{
* * * * * /u/cc/binl/auto_postal 2>&1 > /u/cc/LOG/auto_postal.out
1 0 1 * * /u/cc/binl/auto_eom >/u/cc/LOG/auto_eom 2>&1
59 23 * * * /u/cc/binl/auto_signoff > /u/cc/LOG/auto_signoff 2>&1
10 0 * * * /u/cc/binl/post_sum > /u/cc/LOG/post_sum 2>&1
0 22 * * * /cc/binl/clrdayqty > /cc/LOG/clrdayqty.out 2>&1
-Line 158:
+Line 306:
-Finally give Xclients execute permissions

{{{
chmod +x Xclients
}}}
Configuring FVWM

{{{
mkdir /etc/X11/fvwm2
}}}
Copy from {{{system.fvwm2rc}}} from /u/install or from a client's system and place it in the newly created directory. Also place a symlink to {{{system.fvwm2rc}}} in /etc/

{{{
ln -s /etc/X11/fvwm2/system.fvwm2rc /etc/
}}}
== Packages Needed by Control ==
 * mkisofs - building CD images
 * sharutils - E-Mailing PDF's
 * dvd+rw-tools - Burning DVD's
== Post Control Installation Options ==
cocont system back option should be set to 30.
+For root:

{{{
30 2 * * * /u/cc/binl/netchecktime > /u/cc/LOG/netchecktime.out 2>&1
# The daily backup script
0 3 * * * /u/cc/binl/bacint -s > /u/cc/LOG/bacint.out 2>&1
# Initialise dayfile. Only needed if not using our backup script
#0 3 * * * /u/cc/binl/initda -s > /u/cc/LOG/initda.out 2>&1}}}
=== Background tasks ===
You will need to edit {{{/etc/inittab}}}:

{{{
id:5:initdefault:  # Need to change run level from 3 to 5
v5:345:respawn:su - ccc -c /usr/local/bin/inittab_vnc 2>&1 >> /var/log/vnc.ccc}}}
=== Customer Company ===
 * '''coaad''' Setup the company record(s) for the customer.
 * Ensure that the /u/cc/<CUSTOMER> directory exists and is a copy of standard. Also make sure that the correct amount of users and locations have been set.
 * Enter the customer's company name into '''cocont''''s {{{Company codes to be backed up}}} field.
=== Printers, Overlays and Docket Logos ===
You will need to get the customer's logo and artwork from the sales team.

To create a docket logo, see [[Docket_Logo]].

For a list of compatible laser printers, see[[Laser_Printers]].

For setting up printers, see InstallingPrinter.

=== Data Imports ===
 * Run any data imports necessary.
=== Setting up a DEMO company in a server ===
 * Follow [[DemoCD]] under Linux steps 1-14 for the DEMO company and additional companies as needed.
----
 . CategoryInstallation

Diff for "InstallingControl"