|
Size: 8869
Comment:
|
Size: 0
Comment: mistake on editing the wrong page, should working on freenx at the time
|
| Deletions are marked like this. | Additions are marked like this. |
| Line 1: | Line 1: |
| = How to configure a new server for CONTROL. = == Installing the OS == Please follow the ["Installing Fedora5"] instructions for Fedora installations. == Additional Operating System configuration == === SELinux === SELinux has been known to cause problems with Control's directory model. To turn it off, change {{{ /etc/selinux/config }}} to read {{{ SELINUX=disabled}}} N.B. The changes will not take effect until the machine reboots. === Samba and PAM === New ccpass scripts for updating user passwords work around the problems of password synchronisation. As such, the SambaPasswordSync hack is considered depreciated. To try and ensure locking works reliably between Windows and Linux, edit {{{/etc/samba/smb.conf}}} and add the following lines after the "global" section header: {{{ #get record locking working between Windows and Linux strict locking = yes oplocks = False}}} === Serial Ports === In {{{/etc/rc.d/rc.local}}}, {{{ chmod 666 /dev/ttyS0 chmod 666 /dev/ttyS1}}} == yum == In {{{/etc/yum.repos.d/fedora-repo}}}, {{{/etc/yum.repos.d/fedroa-extras.repo}}} and {{{/etc/yum.repos.d/fedora-updates.repo}}}, set the {{{enable}}} flag to {{{1}}} {{{ enable=1}}} Do '''NOT''' do this for any of the development files. Doing so can cause libraries to be updated and, as a result, CONTROL may not run. Update the packages with {{{ yum update}}} Note: be careful of glibc updates for older releases of CONTROL If yum insists on gpg keys then, in {{{/etc/yum.conf}}} and {{{/etc/yum.repos.d/*}}}, {{{ gpgcheck=0}}} === VPN === Copy {{{vpn.tgz}}} from /u and extract it using the following commands: {{{ # scp <user>@sam:/u/vpn.tgz /etc/ppp/ # cd /etc/ppp # tar -xvzf vpn.tgz}}} Then as root accept the fingerprint: {{{ # ssh 220.233.135.250 The authenticity of host '220.233.135.250 (220.233.135.250)' can't be established. RSA key fingerprint is f6:f0:5c:21:74:0e:03:db:fc:71:e6:21:63:b5:c0:43. Are you sure you want to continue connecting (yes/no)?}}} Type yes and cancel the connection. Add the hostname ({{{uname -n}}}) into {{{ /etc/hosts }}} on muppets. Assign the machine the next IP in the sequence. Also update the ["DNS"]. To test the VPN connection, use the following: {{{ # pppd call crecom nodetach debug}}} Once the VPN can connect correctly, add to the following to {{{/etc/inittab}}}: {{{ vpn:2345:respawn:/etc/ppp/connect-crecom >> /var/log/connect-crecom.error}}} === Additional Packages Needed by Control === The following packages need to be installed to enable some features: * mkisofs - building backup CD images * sharutils - E-Mailing PDF's * dvd+rw-tools - Burning DVD's * postgresql-odbc - New Rel9 and 10 installations require DB support. * cdrecord - Burning CD/DVD backups * rxvt - For running scripts in X11 mode == Configuring the OS for CONTROL == === Creating the control group === Create the following group {{{ # groupadd -g 3232 control}}} === Create and configure the ccc user === Create user ccc {{{ # adduser -g control ccc # passwd ccc}}} Edit the {{{~ccc/.bash_profile}}} to the following: {{{ CUST=`uname -n` export CUST export PS1='${PWD}!>' . /u/cc/usr/common.sh ccusers}}} Setup the VNC password {{{ # mkdir ~ccc/.vnc # vncpasswd ~ccc/.vnc/passwd}}} Create the {{{~ccc/.vnc/xstartup}}} file used by Xvnc. It should read: {{{ #!/bin/sh export NODEID="vnc$DISPLAY" sleep 5 exec fvwm}}} Make {{{~ccc/.vnc/xstartup}}} executable. {{{ chmod +x ~ccc/.vnc/xstartup}}} Transfer ownership of files to ccc {{{ # chown -R ccc:control ~ccc/.vnc}}} === Setup user defaults === Edit {{{/etc/default/useradd}}} such that the following variables are set and that rest can remain the same. {{{ GROUP=3232 HOME=/u/cc/usr}}} Replace the contents of {{{/etc/skel/.bash_profile}}} with the following {{{ logname=`logname` . /u/cc/usr/common.sh if [ "$logname" != "" ]; then if [ "$DISPLAY" = "" ]; then exec start fi fi}}} Copy the {{{~ccc/.vnc/}}} folder to {{{/etc/skel/}}} {{{ # cp -r ~ccc/.vnc /etc/skel/ # chown root:root /etc/skel/.vnc}}} === Copy CONTROL === Package control programs on sam {{{ export CONTROL_FILES=" std/binl std/utbinl std/binx11 std/utbinx11 adm blank standard standard.adm pixmap lib binl binx11 DEMO usr/common.linux " cd /u/ccdev/ tar cvzf control.tgz --exclude=.sccs $CONTROL_FILES}}} Setup /u/cc/ directory {{{ touch /dev/lp8 chmod 666 /dev/lp8 umask 0 mkdir /u/cc/ chmod 777 /u/cc/ ln -s /u/cc /cc mkdir /u/cc/usr chmod 777 /u/cc/usr ln -s ~ccc /u/cc/usr/ccc mkdir /u/cc/LOG chmod 777 /u/cc/LOG chown ccc:control /u/cc/LOG /u/cc/usr chown ccc:control /u/cc/usr/ccc /u/cc/usr/ccc/.* cd /u/cc tar xvzf PATH_TO_CONTROL_TAR_FILE/control.tgz chown ccc:control std/* std/*/* chown ccc:control binl/* chown ccc:control binx11/* binl/link_cntrl chown ccc:control standard/* chmod 666 standard/* cp /u/cc/standard.adm/* /u/cc/adm mv /u/cc/usr/common.linux /u/cc/usr/common.shLibraries}}} For Fedora versions prior to Fedora Core 5, update /etc/ld.so.conf to included the following line {{{ /u/cc/lib}}} For Fedora Core 5 and later, execute: {{{ cd /usr/lib ln -s /u/cc/lib/libcqt3.* .}}} You will also need to edit /u/cc/usr/common.sh {{{ LD_LIBRARY_PATH=/lib:/usr/lib:$CCDIR/lib }}} Then for all versions to rebuild the library cache execute: {{{ ldconfig}}} == X related configuration == === Install necessary fonts === As a minimum, the system should have the 75-dpi, 100-dpi and truetype fonts appropriate for the installed X Font Server To search for the fonts: {{{ yum search fonts}}} The packages are usually of the form fonts-xorg-75dpi Once you have found the correct fonts packages {{{ yum install <font package>}}} === Make console (DISPLAY=0) a VNC server === Edit /etc/X11/xorg.conf {{{ Section "Module" Load "vnc" # Add this line End Section Section "Screen" Option "PasswordFile" "/u/cc/usr/ccc/.vnc/passwd" # Add this line End Section}}} === Installing FVWM === We use FVWM as a slimline window manager where users don't need or expect a full remote desktop. You'll need to locate files fvwm-2.4.19-1.i386.rpm and libstroke-0.5.1-4.fc4.i386.rpm which are available on sam. {{{ # yum install compat-readline43 gtk+ imlib # rpm -Uvh fvwm-2.4.19-1.i386.rpm fvwm-themes-0.6.2-1.noarch.rpm libstroke-0.5.1-4.fc4.i386.rpm}}} Need to update Xclients such that FVWM is started when local user logs in. {{{ # cd /etc/X11/xinit # mv Xclients Xclients.bak # vi Xclients}}} Update Xclients to initialise the control environment and execute FVWM as below: {{{ #!/bin/bash rm -f $HOME/Xrootenv.0 rm -f /tmp/fvwmrc* 2>/dev/null . /u/cc/usr/common.sh exec /usr/bin/fvwm}}} Finally give Xclients execute permissions {{{ chmod +x Xclients}}} Configuring FVWM {{{ mkdir /etc/X11/fvwm2}}} Copy from {{{system.fvwm2rc}}} from /u or from a recent client's system and place it in the newly created directory. Also place a symbolic link to {{{system.fvwm2rc}}} in /etc/ {{{ ln -s /etc/X11/fvwm2/system.fvwm2rc /etc/}}} == Post Control Installation Options == === Backups === * '''cocont''' option {{{Days before display system warning mesg}}} should be set to 30. This allows the client to have at least one system backup to restore various configuration system configuration files in the event of a failure.''' ''' * Enter the Linux device into cocont's {{{Backup device}}} field. === Scheduled processes === '''crontab'''setup auto_postal, eom_job, initda/backups and other scripts that need to run automatically. For ccc: {{{ * * * * * /u/cc/binl/auto_postal 2>&1 > /u/cc/LOG/auto_postal.out 1 0 1 * * /u/cc/binl/auto_eom >/u/cc/LOG/auto_eom 2>&1 59 23 * * * /u/cc/binl/auto_signoff > /u/cc/LOG/auto_signoff 2>&1 10 0 * * * /u/cc/binl/post_sum > /u/cc/LOG/post_sum 2>&1 }}} For root: {{{ 30 2 * * * /u/cc/binl/netchecktime > /u/cc/LOG/netchecktime.out 2>&1 0 3 * * * /u/cc/binl/bacint -s > /u/cc/LOG/bacint.out 2>&1}}} === Background tasks === You will need to edit {{{/etc/inittab}}}: {{{ id:5:initdefault: # Need to change run level from 3 to 5 vpn:2345:/etc/ppp/connect-crecom 2>&1 >>/var/log/connect-crecom.log v5:345:su - ccc -c /usr/local/bin/inittab_vnc 2>&1 >> /var/log/vnc.ccc}}} === Customer Company === * '''coaad''' Setup the company record(s) for the customer. * Ensure that the /u/cc/<CUSTOMER> directory exists and is a copy of standard. Also make sure that the correct amount of users and locations have been set. * Enter the customer's company name into '''cocont''''s {{{Company codes to be backed up}}} field. === Data Imports === * Run any data imports necessary. ---- . CategoryInstallation |
