Setting up android mobile computer Urovo DT50

  1. Charge unit to at least 50% (some come pre charged, some are flat)
  2. Turn on the mobile computer.
  3. Press "SKIP" for connecting to mobile network.
  4. Connect to your local wifi. (choose it from a list and type in the wifi password)
  5. Press "Don't copy".
  6. Log in to your google account. (You need to create one in order to download apps)
  7. Press "SKIP" to adding your phone number.
  8. Agree to google terms of service.
  9. Turn off all the google services and press "Accept".
  10. Skip over additional prompts.
  11. "No Thanks" to "Anything else?"
  12. Click the "Play Store" icon.
  13. Search for "bVNC" and install "bVNC: Secure VNC Viewer"

    attachment:install.png

  14. Press the "OPEN" button to run bVNC the first time.

    attachment:open.png

  15. Click on the "Allow" button.

    attachment:allow.png

Set up bVNC.

  1. You should be already in the bVNC app after installing. If you are on the "home" screen, Press the bVNC icon on the upper left of the screen.
  2. Click on the computer icon with the + sign inside.

    attachment:create.png

  3. Under Title fill in the session name: (These will be supplied when we set it up and send the mobile computers)
  4. Put server's IP under VNC Server.
  5. On the port, fill in VNC Number + 5900. 
    Example, for session 27, 5900 + 27 = 5927
Port is 5927
  6. Fill in the VNC Password.

    attachment:settings.png Note that the IP address in the above example, 192.168.1.196 is just that, an example, please enter your server's IP address

  7. Click on the disk icon on top to save.
  8. Press the computer icon with your session name to start Control Mini.

    attachment:main.png

If you get an error installing bVNC

  1. Swipe down from the top and click the gear icon.
  2. Scroll down and press "System".
  3. Press "System update."
  4. Choose remote updates.
  5. Press on any new updates that show up.

Using the Mobile Computers:

  1. Press the "bVNC" icon if it isn't running.
  2. Press the Computer icon with your session name to start Control Mini.
  3. In order to scan with just the unit itself, just press either orange scan button on the side of the unit.
  4. To install trigger, strap must be removed (held by 2 T5 screws).
  5. If using the trigger, just press on the trigger button to scan.

  6. Instructions :
    urovo.pdf

Mobile_Computer_Setup_DT50 (last edited 2023-04-27 03:43:03 by JonCo)