|
Size: 158
Comment:
|
Size: 1041
Comment:
|
| Deletions are marked like this. | Additions are marked like this. |
| Line 1: | Line 1: |
| = CANCELLING PRINT JOBS = Type: lprm -P"printername" all |
= CANCEL PRINT JOBS = Type: |
| Line 4: | Line 4: |
| login as root | |
| Line 5: | Line 6: |
| lprm -P"printername" - (If the system is running "cups" then you can just run lprm - eg. lprm -P marion2_overlay - |
|
| Line 14: | Line 20: |
service cups restart *** check to make sure the windows firewall has not turned on *** check also that VPN is connected search windows firewall and turn it off run the above stuff again as it needs to start again reboot the machine When east gardens stopped printing. you could check the ip where the printer is printing (lpstat) and then check on their windows setting to ensure the printer (under properties) is at that ip address = CHECK IF YOU CAN CONNECT TO PRINTER = go to ABE: type : lpstat -t |grep ufb_bb1 you will get back: device for ufb_bb1_laser: lpd://10.3.0.138/Laser telnet 10.3.0.138 515 if it comes back with: Connected to 10.3.0.138. Escape character is '^]. Press ctrl sqaure_right bracket telnet> quit |
CANCEL PRINT JOBS
Type:
login as root
lprm -P"printername" -
(If the system is running "cups" then you can just run lprm -
eg. lprm -P marion2_overlay -
ENABLING PRINTERS
Type:
su -
cupsenable "printername"
/etc/init.d/cups start
service cups restart
*** check to make sure the windows firewall has not turned on
*** check also that VPN is connected
search windows firewall and turn it off
run the above stuff again as it needs to start again
reboot the machine
When east gardens stopped printing. you could check the ip where the printer is printing (lpstat) and then check on their windows setting to ensure the printer (under properties) is at that ip address
CHECK IF YOU CAN CONNECT TO PRINTER
go to ABE:
type : lpstat -t |grep ufb_bb1
you will get back:
device for ufb_bb1_laser: lpd://10.3.0.138/Laser
telnet 10.3.0.138 515
if it comes back with:
Connected to 10.3.0.138. Escape character is '^].
Press ctrl sqaure_right bracket
telnet> quit