Differences between revisions 1 and 4 (spanning 3 versions)
⇤ ← Revision 1 as of 2006-05-16 05:55:32 →
Size: 664
Editor: rowlf
Comment:
← Revision 4 as of 2007-03-12 01:07:12 → ⇥
Size: 1256
Editor: DannyCheung
Comment:
Deletions are marked like this. Additions are marked like this.
Line 3: Line 3:
The ability to scan Interleave 2 of 5 and Code 93 barcodes is disabled by default. The ability to scan Interleaved 2 of 5 and Code 93 barcodes is disabled by default.To enable the Interleaved 2 of 5 barcode scanning,
Line 5: Line 5:
To enable the Interleave 2 of 5 barcode scanning,

 1. Print out a copy of page "5-91" (167) from the instructin manual.		  1. Print out a copy of page "5-91" (167) from the instruction manual.
Line 13: Line 11:
 1. Print out a copy of page "5-123" (199) from the insttruction manual.  1. Print out a copy of page "5-123" (199) from the instruction manual.
Line 17: Line 15:
Instruction manual (PDF): As at 09/03/07, this scanner will pre-pend a "Code ID" to the output. You will need to turn this off for each of the individual barcode symbologies. To disable the Code ID,

 1. Print off the B-1 (283) from the instruction manual
 1. Print off the "Code ID Selection" barcode page for the appropriate symbology.
 1. Scan the "START" barcode
 1. Scan the "Set <symbology> Code ID Characters" barcode
 1. Scan the 0 barcode from the Alpha-numeric Pad
 1. Scan the 0 barcode again from the Alpha-numeric Pad
 1. Scan the "SET" barcode
 1. Scan the "END" barcode
Instruction manual (PDF): attachment:R44-2467A.pdf

As at 27/04/06, this scanner comes pre-configured to scan EAN8, EAN-13, Code 39 and Code 128 barcodes.

The ability to scan Interleaved 2 of 5 and Code 93 barcodes is disabled by default.To enable the Interleaved 2 of 5 barcode scanning,

  1. Print out a copy of page "5-91" (167) from the instruction manual.
  2. Scan the "START" barcode
  3. Scan the "Enable Interleave 2 of 5" barcode
  4. Scan the "END" barcode

To enable the Code 93 barcode scanning,

  1. Print out a copy of page "5-123" (199) from the instruction manual.
  2. Scan the "START" barcode
  3. Scan the "Enable Code 93" barcode
  4. Scan the "END" barcode

As at 09/03/07, this scanner will pre-pend a "Code ID" to the output. You will need to turn this off for each of the individual barcode symbologies. To disable the Code ID,

  1. Print off the B-1 (283) from the instruction manual
  2. Print off the "Code ID Selection" barcode page for the appropriate symbology.
  3. Scan the "START" barcode

  4. Scan the "Set <symbology> Code ID Characters" barcode

  5. Scan the 0 barcode from the Alpha-numeric Pad
  6. Scan the 0 barcode again from the Alpha-numeric Pad
  7. Scan the "SET" barcode
  8. Scan the "END" barcode

Instruction manual (PDF): attachment:R44-2467A.pdf

QS6500 (last edited 2013-09-18 06:09:34 by localhost)